Scaffold Accessories

Part No: MFGRSET3/4

This safety guardrail has a patent-pending feature that allows the removal of one of its side panels when working close to a wall.

Safe, secure, and durable.

Part No: MFOUTR18ASET4

18 inch outriggers clamp to the bottom of your scaffold tower to increase the base width. This is used to increase the stability of the tower.

Part No: MFOUTR44SET4

This outrigger pins to the frame with an upper and a lower pin and a bolt to eliminated all slop. Our large outrigger is 30 inches long.

Use this when stacking 3 high.

Part No: MF3785-5SET4

Durable 5″ casters designed for Multifunction units. Ideal when adding outriggers. This set of four keeps your scaffold mobile and stable.

Part No: MFTSHELF

This tool shelf can be mounted on the guardrail system as well as end frames.

It fits where you need to use it -- waist high, knee high, above the platform, or down low on the ladder frames as well. Inside or outside. It even has a place for your coffee.

Part No: MFSTABKIT

The multifunction stability kit turns what’s designed for DIY’ers and craftsmen into a platform with industrial stability. Add this to our 6’ Multifunction Unit to make it feel almost as if its parts are welded together.

Part No: MF378CJWSET4

This jack replaces the caster at the end of the ladder frame or outrigger. They allow adjustment for greater overall height but are indispensable when working on uneven surfaces -- even on stair steps.

Part No: MF379HATCH

This platform allows you to climb a multifunction ladder frame internal to the scaffolding.

When the climber reaches the platform, they simply open the hatch and climb through. The hatch closes behind them and is secured by a spring-loaded locking mechanism.

Part No: BD374GRSET

This safety guardrail package is a stronger, more compact version of a traditional 5’ X 7’ Guardrail. The main difference is its parts break down for convenient storage and transportation.

An added benefit of our safety rail's modular construction is overlapping steel, providing substantially stronger guardrails than the contemporary versions.

Part No: BD380SET2

This ...

Part No: BD374GB

A collapsible diagonal support for 5′×5′ or 5′×7′ rolling scaffolds, keeping your setup square and stable—compact for easy transport and storage.

Part No: BD374TB7

A collapsible four‑inch toe‑board barrier that prevents tools and debris from falling. Works seamlessly with the BreakDown Guardrail System and packs down for efficient storage.

Part No: 378SET4

Heavy duty wheels, load tested to handle 500 lb with an 8-to-1 safety margin. It’s cast iron frame has a rubber exterior that is two inches wide and over an inch thick.

Double locking, so the wheel cannot turn or rotate when locked. Zinc-plated grease fittings keep things rolling smoothly.

Part No: 378JPSET4

Level jacks provide independent adjustment of each leg of a frame and brace configuration. They can be used to compensate for uneven ground or to sneak a bit of extra height into a configuration when inches matter.

Part No: 374CJSET4

Set of four adjustable caster jacks designed for use with scaffolding frames. They allow you to fine-tune height and keep towers level and secure, even on uneven surfaces.

Part No: 381SPANPL

Galvanized 9″ stack pin designed for securely stacking frames. The included spring rivet locks in place and prevents loss thanks to positive spring tension.

Part No: 381PT

Half-moon locking pin that prevents stack pins or casters from slipping—slides into place to ‘hug’ the frame and lock securely.

Part No: 381SPANPL

Sturdy zinc-plated span pin designed for multi-use: secures casters or guard rail posts in place on exterior and interior scaffolding setups. OSHA-compliant and built for long-lasting performance.

Part No: 379A7

These planks feature zinc-plated bolts with nylon backing nuts rather than rivets, and have wind latches on both ends for safety.